Adjust or control the following functions: Fuel injection, Ratio of primary vs. secondary injectors, Ignition timing, Secondary throttle butterfly, Engine over-rev, Auto shifter ignition cut time, Pit road speed limiter, Rev spike control sensitivity, Rev spike control ignition cut, Launch control
Sub-harness (26031-0700) is required when using the stock main harness and is not required when using the racing main harness (26031-0698 or 26031-0699)
PC interface connection (26031-0025, serial port only) does not mount to the vehicle, but is a required "tool" in order to communicate with the Adjustable ECU
Racing Main Wiring Harness (Analog Meter)
Eliminates unnecessary wires, plugs and relay boxes
Utilizes the analog tachometer with temp gauge
Utilizes a lightweight racing upper fairing mount
Use the following items as a set
Racing Main Wiring Harness (Standard Meter)
Eliminates unnecessary wires, plugs and relay boxes
Use the following items as a set
Lightweight Generator
For improved acceleration
Produces approx. 7-8 amps. of current (standard current is approx. 30 amps)
Use the following items as a set
Fit 08-10 Ninja® ZX™-10R
Note: See charts for diagrams and additional information.
